Modular Pipework Fittings: Branches, T-Pieces, and Inspection Pipes
.
BritSOLIDS provides a comprehensive range of precision-engineered Modular Pipework Fittings designed to integrate seamlessly into any lipped-end tubing system. From diverting material flow to providing essential maintenance access, our fittings are the industry standard for bulk solids handling and industrial extraction in the UK.
.
.
Optimised Flow: Branch & Y-Pieces
JACOB modular piping system
In Pneumatic Conveying and Gravity Fall systems, the geometry of a branch is critical. A poorly designed T-piece creates turbulence, material “hang-up,” and excessive wear. Our fittings are engineered with smooth internal transitions to maintain constant velocity.
- Symmetric Y-Pieces (Trouser Pieces): Ideal for splitting a single flow into two equal streams in gravity-fed systems.
.
.
.
.
JACOB modular piping system
- Lateral Branches (30° and 45°): The preferred choice for extraction headers. The shallow angle reduces back-pressure and minimizes the risk of blockages compared to 90° entries.
- T-Pieces (90°): Standard connectors for air distribution and low-velocity ventilation lines.
.
.
.
.
.
.
Essential Maintenance: Inspection & Cleaning Pipes
JACOB modular piping system
.
.
UK safety and hygiene standards (such as HACCP and COSHH) require regular internal inspection of process lines. Our Inspection Pipes allow for rapid access without dismantling the entire run.
- Inspection Pipes with Cleaning Hatches: Feature a secure, bolted, or quick-release cover with a food-grade seal. Perfect for clearing blockages in “sticky” powder lines.
- Observation Pipes (Plexiglass/Glass): Allow for 360° visual monitoring of the material flow. Essential for identifying feed rate issues or “slugging” in pneumatic lines.
- Tapping Points: Small-diameter ports for the installation of sensors, pressure gauges, or air-sampling equipment.
.
.
Modular Pipework Fittings – Technical Specifications & Build Quality
All our modular fittings are manufactured to the same rigorous standards as our straight tubing:
- Wall Thickness: Available in 1mm (Ventilation/Dust) or 2mm – 3mm (Abrasive Bulk Solids).
- Construction: Laser-welded or seam-welded for maximum structural integrity.
- Materials: Carbon Steel prime-coated, Galvanised Steel for cost-effective extraction or AISI 304/316L Stainless Steel for food and pharmaceutical environments.
.
.
Technical FAQ: Modular Ducting Fittings
Q: What is the benefit of a 30-degree branch over a 90-degree T-piece?
A: In extraction and bulk handling, a 30-degree branch significantly reduces turbulence and material impact on the opposite wall of the pipe. This extends the service life of the fitting and improves overall system efficiency.
A: In extraction and bulk handling, a 30-degree branch significantly reduces turbulence and material impact on the opposite wall of the pipe. This extends the service life of the fitting and improves overall system efficiency.
.
Q: Are the inspection hatches airtight?
A: Yes. Every Inspection Pipe is fitted with a high-density NBR or Silicone gasket to ensure that the system maintains its pressure or vacuum integrity when the hatch is closed.
A: Yes. Every Inspection Pipe is fitted with a high-density NBR or Silicone gasket to ensure that the system maintains its pressure or vacuum integrity when the hatch is closed.
.
Q: Can you provide bespoke branch angles?
A: While 30°, 45°, and 90° are our standard stock items, we can supply bespoke branch pieces to match any specific process layout.
A: While 30°, 45°, and 90° are our standard stock items, we can supply bespoke branch pieces to match any specific process layout.