Silo Accessories
All the equipment a silo needs.
Level Sensors
They are necessary for the proper monitoring of storage silos for the automation of production. There are minimum or maximum level sensors. There are level sensors of many types such as single contact, rotating propeller, vibrating fork, audible signal, visual signal, etc.
There are also analog sensors for a continuous signal (ie. radar level sensors or piezoelectric wire rope throughout the depth of the silo).
Overpressure (Relief) Valves
At the top of air-fed silos, a relief (overpressure) valve is also needed to protect the silos from overpressure.
Filters for Silo
They are placed on top of the silos. In silos, which are supplied by pneumatic conveying or silo trucks, a filter is needed on the roof.
Filter over silo
Vibrating silo cones
At the outlet of the silo, steel cones with one or two vibrators are placed to facilitate the emptying of the silo for difficult-to-flow products.
A flexible hose is placed before and after the vibrating cone.
vibrating cone
Slide gate valves for Silos
Slide gate valves (knife valves), moving on side rails. Watertight due to the Perbunan rubber seal.
In the manual version with an additional smaller flap that is stabilized mechanically and in intermediate positions.
In the automatic version with air piston and 5/2 solenoid valve with two proximity switches or with an electric motor.